Antimicrobial activity of essential oils against biofilms formed in dental acrylic resin: a systematic review of in vitro studies.

This study aimed to answer the question formulated according to the PICO strategy: 'Which essential oils show antimicrobial activity against biofilms formed on dental acrylic resin?' composed by population (dental acrylic resin), intervention (application of essential oils), comparison (denture cleansers, antifungal drugs, chlorhexidine, and oral mouthwashes), and outcome (antibiofilm activity). In vitro experimental studies evaluating the activity of EOs on biofilm formed on acrylic resin were included. PRISMA guidelines were followed, and the search was performed in the PubMed, Science Direct, Embase, and Lilacs databases and in the gray literature using Google Scholar and ProQuest in December 2023. A manual search of the reference lists of the included primary studies was performed. Of the 1467 articles identified, 37 were selected for full-text reading and 12 were included. Twelve EOs were evaluated, of which 11 showed activity against Candida spp., 3 against Staphylococcus aureus, and 1 against Pseudomonas aeruginosa. The EOs of Cymbopogon citratus, Cinnamomum zeylanicum, and Cymbopogon nardus showed higher action than chlorhexidine, C. nardus higher than Listerine, C. citratus higher than nystatin, and Melaleuca alternifolia higher than fluconazole and nystatin. However, chlorhexidine was more effective than Lippia sidoides and Salvia officinalis, sodium hypochlorite was more effective than L. sidoides, nystatin was more effective than Zingiber officinale, Amphotericin B more effective than Eucalyptus globulus and M. alternifolia. In conclusion, the EOs of C. zeylanicum, C. citratus, C. nardus, and M. alternifolia showed antimicrobial activity to reduce biofilm on dental acrylic resin.

Comparative analysis of the physical, chemical, and microbiological properties of Ti-6Al-4V disks produced by different methods and subjected to surface treatments.

STATEMENT OF PROBLEM: To improve the osseointegration of dental implants and reduce microbiological growth, different micro- and nanoscale surface topographies can be used. PURPOSE: The purpose of this in vitro study was to evaluate the influence of Ti-6Al-4V with 4 surfaces, machined (DU), machined+hydroxyapatite (DUHAp), machined+acid-alkali treatment (DUAA), and additive manufacturing (DMA), on the physical, chemical, and microbiological properties. MATERIAL AND METHODS: The topography of Ti-6Al-4V disks with the 4 surfaces was evaluated by scanning electron microscopy (SEM), the chemical composition by energy dispersive X-ray spectroscopy (EDS), and the crystalline structure by X-ray diffraction (XRD). Physical and chemical properties were analyzed by using wettability and surface free energy, roughness, and microbial adhesion against Staphylococcus aureus by colony forming units (CFU). One-way ANOVA analysis of variance and the Tukey multiple comparisons test were applied to evaluate the data, except CFU, which was submitted to the Kruskal-Wallis nonparametric test (α=.05). RESULTS: DU photomicrographs showed a topography characteristic of a polished machined surface, DUHAp and DUAA exhibited patterns corresponding to the surface modifications performed, and in DMA the presence of partially fused spherical particles was observed. The EDS identified chemical elements inherent in the Ti-6Al-4V, and the DUHAp and DUAA disks also had the ions from the treatments applied. XRD patterns revealed similarities between DU and DMA, as well as characteristic peaks of hydroxyapatite (HA) in the DUHAp disk and the DUAA. Compared with DU and DMA the DUHAp and DUAA groups showed hydrophilic behavior with smaller contact angles and higher surface free energy (P<.05). DMA showed a higher mean value of roughness, different from the others (P<.05), and a higher CFU for S. aureus (P=.006). CONCLUSIONS: DUHAp and DUAA showed similar behaviors regarding wettability, surface free energy, and bacterial adhesion. Among the untreated groups, DMA exhibited higher roughness, bacterial adhesion, and lower wettability and surface free energy.

Denture stomatitis: Treatment with antimicrobial drugs or antifungal gels? A systematic review of clinical trials.

STATEMENT OF PROBLEM: Gel formulations containing antimicrobials are a potential alternative for the development of new medicines for the treatment of denture stomatitis (DS). However, whether they are more effective than antifungal drugs is unclear. PURPOSE: The purpose of this systematic review was to identify whether gels formulated with antimicrobial substances are more effective and biocompatible for the treatment of DS than antifungal drugs. MATERIAL AND METHODS: This systematic review was structured according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) and registered in the International Prospective Register of Systematic Reviews (PROSPERO; CRD42022379510). Searches were performed in the PubMed, Lilacs, Web of Science, Scopus, Embase, and Google Scholar databases in November 2022. Randomized and nonrandomized clinical trials comparing the efficacy of experimental gels and conventional antifungals in the treatment of DS were included. RESULTS: Gels formulated with Zataria multiflora essential oil and clove and cinnamon extracts showed higher antimicrobial efficacy compared with miconazole and clotrimazole. Formulations containing Uncaria tomentosa, Punica granatum, and propolis extract showed similar efficacy to nystatin and miconazole. Two formulations containing P. granatum were less effective than nystatin and miconazole. Gels of Z. multiflora and miconazole induced adverse effects including burning, itching, nausea, and vomiting. The included studies did not evaluate the biocompatibility of the gels. CONCLUSIONS: Gels formulated with natural antimicrobials such as Z. multiflora, U. tomentosa, P. granatum, propolis, and clove and cinnamon showed higher or similar antimicrobial efficacy to conventional antifungals in the treatment of DS. The biocompatibility of experimental gels based on natural agents should be evaluated.

Influence of dental implant/mini-implant design on stress distribution in overdentures: a systematic review.

PURPOSE: Critically evaluate the existing literature and answer the question, "Does the dental implant/mini-implant design influence the stress distribution in prosthetic overdentures according to finite element analysis?". METHODS: This systematic review was registered in the Open Science Framework (osf.io/2bquj) and followed the PRISMA protocols. The custom search strategy was applied to 4 databases. In vitro experimental studies that evaluated the influence of dental implant/mini-implant design on stress distribution in overdentures by FEM, without time and language restrictions, were included. The selection process was carried out in two stages by two reviewers independently. Risk of bias analysis was performed by a checklist of important parameters. RESULTS: Sixty articles were evaluated by their title and abstract, four were selected for full reading, three were relevant, and nine were included by additional search. The 12 studies have a low risk of bias. The meta-analysis could not be performed due to the heterogeneity of the data (implant type, design variation, load intensity, and direction). CONCLUSION: It can be inferred from the evaluated literature that design modifications influence the stress distribution, but as the FEM presents limitations inherent to the in vitro study, clinical trials are necessary to infer the effectiveness of the modifications. It should be noted that there is no consensus on which is the best thread design and that implants with a very narrow diameter are subject to the highest stress concentration.

Osseointegration, antimicrobial capacity and cytotoxicity of implant materials coated with graphene compounds: A systematic review.

The use of graphecs excellent mechanical properties. However, it is necessary to evaluate the biological effects of this material. This systematic review aimed to observe and understand through studies the current state of the art regarding osseointegration, antimicrobial capacity, and the cytotoxicity of graphene coating applied to the surface of dental implant materials. Searches in PubMed, Embase, Science Direct, Web of Science, and Google Scholar databases were conducted between June and July 2021 and updated in May 2022 using the keywords: graphene, graphene oxide, dental implants, zirconium, titanium, peek, aluminum, disilicate, methyl-methacrylate, cytotoxicity, osseointegration, and bone regeneration. The criteria included in vivo and in vitro studies that evaluated antimicrobial capacity and/or osseointegration and/or cytotoxicity of dental implant materials coated with graphene compounds. The risk of bias for in vitro studies was assessed by the JBI tool, and for in vivo studies, Syrcle's risk of bias tool for animal studies was used. The database search resulted in 176 articles. Of the 18 articles selected for full reading, 16 remained in this systematic review. The use of graphene compounds as coatings on the surface of implant materials is promising because it promotes osseointegration and has antimicrobial capacity. However, further studies are needed to ensure its cytotoxic potential.

Graphene loaded into dental polymers as reinforcement of mechanical properties: A systematic review.

Graphene compounds are incorporated into polymers in order to improve their mechanical properties and in dentistry this modification favors the clinical performance of these materials. The aim of this review was to evaluate graphene compounds, their concentrations, and their effect on mechanical properties as flexural, tensile, and compressive strength and hardness of polymethylmethacrylate (PMMA) and polyether-ether-ketone (PEEK) for dental application. The search was carried out in two steps in PubMed/Medline, Embase, Scopus, and Web of Science databases. The eligibility criteria included studies that incorporated pure graphene compounds into dental polymers and evaluated their mechanical properties. Were found 4984 results, of which 11 articles were included in this review. Graphene compounds: graphene oxide (GO), reduced graphene oxide (rGO), and graphene nanoplatelets (GNP) were incorporated into PMMA and PEEK, in concentrations ranging from 0.1 to 10 wt%. Concentrations lower than 0.75 wt% of GO in PMMA and 1 wt% of GNP in PEEK resulted in increased flexural, tensile, compression strength, and hardness of these polymers. It was concluded that the incorporation of graphene compounds in low concentrations increases dental polymers' mechanical properties.

Adhesion of biofilm, surface characteristics, and mechanical properties of antimicrobial denture base resin.

PURPOSE: This study incorporated the nanomaterial, nanostructured silver vanadate decorated with silver nanoparticles (AgVO3), into heat-cured resin (HT) at concentrations of 2.5%, 5%, and 10% and compared the adhesion of multispecies biofilms, surface characteristics, and mechanical properties with conventional heat-cured (HT 0%) and printed resins. MATERIALS AND METHODS: AgVO3 was incorporated in mass into HT powder. A denture base resin was used to obtain printed samples. Adhesion of a multispecies biofilm of Candida albicans, Candida glabrata, and Streptococcus mutans was evaluated by colony-forming units per milliliter (CFU/mL) and metabolic activity. Wettability, roughness, and scanning electron microscopy (SEM) were used to assess the physical characteristics of the surface. The mechanical properties of flexural strength and elastic modulus were tested. RESULTS: HT 10%-AgVO3 showed efficacy against S. mutans; however, it favored C. albicans CFU/mL (P < .05). The printed resin showed a higher metabolically active biofilm than HT 0% (P < .05). There was no difference in wettability or roughness between groups (P > .05). Irregularities on the printed resin surface and pores in HT 5%-AgVO3 were observed by SEM. HT 0% showed the highest flexural strength, and the resins incorporated with AgVO3 had the highest elastic modulus (P < .05). CONCLUSION: The incorporation of 10% AgVO3 into heat-cured resin provided antimicrobial activity against S. mutans in a multispecies biofilm did not affect the roughness or wettability but reduced flexural strength and increased elastic modulus. Printed resin showed higher irregularity, an active biofilm, and lower flexural strength and elastic modulus than heat-cured resin.

Analysis of stress/strain distribution in dental mini-implants manufactured by additive manufacturing and machining.

The study aimed to analyze the stress/strain distribution of new designs of mini-implants manufactured by machining and additive manufacturing. Four designs were evaluated (Ø2.0 mm × 10 mm): Intra-lock, helical, threaded machined (MN threaded) and threaded by additive manufacturing (AM threaded). Analysis of stress was performed through photoelastic analysis (100 N axial/oblique loads) and analysis of strain by digital image correlation (DIC) (250 N axial/100 N oblique load). Data distribution was verified using the Shapiro-Wilk test and a significance level of 5% was adopted. Quantitative data were analyzed using the non-parametric Kruskal-Wallis test. In photoelastic analysis, the Intra-lock mini-implant showed the highest stresses in the cervical (104 kPa), middle (108 kPa), and apical (212 kPa) thirds. Higher stresses were observed in the oblique loading situation for all designs. For DIC analysis, axial loading, a significant difference was observed for the AM Threaded mini-implants about the other designs in the cervical third (p = .04), with the highest strain value 47 µÎµ [10; 76]. In oblique loading, a significant difference between the mini-implants was observed in the middle and apical thirds, with higher strains for the AM threaded design -185 µÎµ [-173; 162] (p = .009) and 242 µÎµ [87; 372] (p = .013), respectively. In general, the influence of different mini-implant designs and the additive manufacturing method on the stress/strain was observed, in the photoelastic and DIC analysis. The evaluated designs demonstrated a lower concentration of stress/strain in the cervical region compared to the apical region, and higher stress/strain in situations of oblique load compared with axial load.

Reasons for the fatigue of ball attachments and their O-rings: A systematic review.

The ball attachments and their O-rings used for the retention and stabilization of overdentures showed a decrease in retention as the number of cycles increased. This fact resulted in a decrease in the retention of the prosthesis. The purpose of this study was to evaluate the fatigue resistance of ball attachments through a systematic review. An electronic search was performed using the Cochrane Library, LILACS, PubMed, ScienceDirect, and Web of Science databases. The search was conducted based on the PICOS framework. The inclusion criteria involved in the search comprised research articles written in English and published between the years 2000 and 2020. In the final selection, 18 articles were included in the review. Most of these studies performed the fatigue retention tests using parallel implants without angles. However, some studies used different angles to analyze the fatigue retention values. With the passage of time, the wear results in deformation and, as a consequence, a decrease in the retention of most attachments, leading to treatment failure. The main factor to be considered is the loss of retention of these components and their low durability. The loss of retention is due to large extent to the materials used to manufacture the attachments and O-rings, the size and angulation of the implants, and the length of the prosthesis. Future research is needed to further elucidate the reasons for the failure of the attachments.

Osseointegration in relation to drilling speed in the preparation of dental implants sites: A systematic review.

STATEMENT OF PROBLEM: The drilling speed used for preparing dental implants may affect bone-implant contact (BIC), implant stability quotient (ISQ), and bone area fraction occupancy (BAFO). Different rotational speeds and the presence or absence of irrigation during site preparation have been investigated, but an established protocol for achieving the best osseointegration results is lacking. PURPOSE: The purpose of this systematic review was to investigate the influence of drill rotational speed on bone drilling for dental implant placement and its relationship with osseointegration. MATERIAL AND METHODS: This review included the preferred reporting items for systematic reviews and meta-analyses (PRISMA) and was registered in the international prospective register of systematic reviews (PROSPERO) database. Electronic searches were performed in the MEDLINE (PubMed), Scopus, Science Direct, and Embase databases. The risk of bias was analyzed by using the systematic review center for laboratory animal experimentation (SYRCLE). RESULTS: A total of 1282 articles were found, and after removing duplicates and applying the eligibility criteria to in vivo articles on animals that addressed drilling speed and its relationship to osseointegration, 8 articles were selected for analysis. Of these, 5 articles showed no statistical differences, and 3 others showed significantly better osseointegration results by analyzing the parameters of BIC, BAFO, ISQs, and pull-out forces (PoFs). In all selected articles, high-speed drilling was performed with irrigation. CONCLUSIONS: Although drilling speed seems to affect bone perforation, no definitive protocol was found in the literature consulted. The results vary depending on the combination of different factors, including bone type, irrigation, and drilling speed.

Influence of surface treatment by laser irradiation on bacterial adhesion on surfaces of titanium implants and their alloys: Systematic review.

Objective: The aim of this systematic review was to present the current knowledge on the influence of laser surface treatment on the adhesion of bacteria to titanium and its alloys. Design: This review was structured according to PRISMA guidelines for systematic reviews and meta-analyses, and registered on the Open Science Framework platform (https://doi.org/10.17605/OSF.IO/FTA3W). Article searches were performed in 4 databases: PubMed, Scopus, Embase, and Science Direct. In addition, a manual search was performed in the reference lists of the selected articles. The selection of articles was performed by two reviewers. The articles found were screened for eligibility using the previously established inclusion and exclusion criteria. The methodological quality of the studies was assessed using the Joanna Briggs Institute (JBI) Critical Assessment Checklist for Quasi-Experimental Studies (non-randomized experimental studies). Results: Most of the studies evaluated showed that surface treatment by laser irradiation can affect the adhesion of bacteria to titanium surfaces and that this is directly related to changes in surface properties such as chemical composition, morphology, roughness, and wettability, as well as the type of bacterial species involved. Conclusions: The studies considered in this systematic review have shown that surface treatment by laser irradiation is a promising technique to reduce the adhesion of bacteria on the surface of titanium implants.

Association between depression and temporomandibular dysfunction in adults - a systematic review.

OBJECTIVE: To critically evaluate the literature and answer the question: "Is there an association between depression and temporomandibular disorder (TMD) in adults?" METHODS: The personalized search strategy was applied to PubMed, Embase, Web of Science, and Scopus databases. Articles were selected in two stages according to the eligibility criteria. The Joanna Briggs Institute (JBI) tool was used to analyze the risk of bias according to the type of study. RESULTS: The included articles presented a moderate risk of bias. Based on the studies, individuals with TMD have higher levels of depression compared to the control group. There is also a direct association in that individuals with depression are more susceptible to developing TMD. CONCLUSION: There is a probable association between depression and TMD in adults. However, more studies with high methodological quality are needed to confirm this finding.

Influence of Er:YAG laser irradiation on surface properties of Ti-6Al-4V machined and hydroxyapatite coated.

Surface treatment by laser irradiation can change the topography of titanium; however, little is known about the changes it causes when applied to other coatings. This study aimed to evaluate the influence of Er:YAG laser irradiation on the surface properties of titanium-aluminum-vanadium (Ti-6Al-4V) discs. Four Ti-6Al-4V surfaces were evaluated (n = 10): CON-control, machined without surface treatment; LT-machined + laser treatment; HA-hydroxyapatite coating; and LT-HA-hydroxyapatite coating + laser treatment. For the laser treatment, an Er:YAG laser with a wavelength of 2940 nm, a frequency of 10 Hz, and an energy density of 12.8 J/cm2 was used. The morphology of the coating was investigated by scanning electron microscopy and the surface composition by energy-dispersive X-ray spectroscopy. The influence of laser irradiation treatment on roughness and wettability was also evaluated. The Er:YAG laser promoted a significant reduction in the roughness Sa (p < 0.05) and in the contact angle (p = 0.002) of the LT surface compared to the CON surface. On the LT-HA surface, a significant decrease in roughness was observed only for the Rz parameter (p = 0.015) and an increase in the contact angle (p < 0.001) compared to the HA surface. The use of the Er:YAG laser with the evaluated parameters decreased the surface roughness and improved the wetting capacity of machined without surface treatment. In the group with hydroxyapatite coating, the laser influenced the surface roughness only for the parameter Rz and reduced their wetting capacity.

Analysis of the influence of surface treatment by high-power laser irradiation on the surface properties of titanium dental implants: A systematic review.

STATEMENT OF PROBLEM: High-power laser irradiation may be a promising treatment for titanium dental implant surfaces. However, systematic reviews of the influence of high-power laser irradiation on the different properties of titanium surfaces are lacking. PURPOSE: The purpose of this systematic review was to analyze the influence of surface treatment by high-power laser irradiation on the surface properties of titanium and its alloys. MATERIAL AND METHODS: The PubMed, LILACS, COCHRANE library, and Science Direct databases were searched, and articles published in the last 10 years were included. Of the 725 articles initially identified, 27 were selected after full reading and the application of inclusion and exclusion criteria. RESULTS: The studies evaluated showed that laser irradiation treatment, depending on the settings and parameters used, promoted changes in the surface properties of titanium. In general, lower speed and a higher number of scans increased roughness. Laser surface treatment promoted the inclusion of more oxygen and improved the wetting capacity of titanium. Additionally, laser treatment improved the adherence of coatings. CONCLUSIONS: Changes in the surface properties of titanium after laser treatment have been demonstrated. However, determining protocols with specific parameters is necessary to optimize the results.

Influence of 3D-Printing Parameters and Characteristics of Complete Denture Bases on Evaluated Properties: A Scoping Review.

PURPOSE: To verify the parameters and characteristics evaluated in 3D-printed complete denture (CD) bases and how they influence CD properties. MATERIALS AND METHODS: This work was registered in Open Science Framework (osf.io/4um6v) and followed the PRISMA Extension for Scoping Reviews. A search of peer-reviewed articles published up to April 9, 2020, was performed on the PubMed, LILACS, Cochrane Library, and Science Direct databases. The review question based on the PCC (population, concept, and context) was: What printing parameters and characteristics of CD bases can influence their properties? RESULTS: The database search resulted in 1,945 articles, and the initial screening was carried out in 1,390 articles, 17 of which were selected for inclusion in this review. The present authors verified that cleaning the prosthesis with alcohol after printing followed by a postcuring cycle influences biocompatibility and residual monomers. The printing angle influences physicomechanical properties, microbial adhesion, and tissue adaptation. Accuracy is influenced by layer thickness and manufacturing technique, which also influences retention and tissue adaptation. The incorporation of antimicrobial agents influences physicomechanical properties and antimicrobial activity. The method of union between the denture base and teeth influences mechanical strength. CONCLUSIONS: Printed denture bases showed good adaptation to tissues and accuracy with 100-µm layer thickness, but the base must be cleaned in ethanol followed by postcuring for better biocompatibility. Nano- and microparticles can be added to provide antimicrobial activity and better resistance. The printing angle and mechanical properties must be better evaluated. Int J Prosthodont 2023;36:620-629.

Effects of photobiomodulation on auriculotherapy points for sleep disorders, anxiety, and temporomandibular dysfunctions.

OBJECTIVE: The purpose of this study was to evaluatephotobiomodulation applied at auriculotherapy points forsleep disorder (SD) and anxiety related to temporomandibulardysfunction (TMD). METHODS: The study consisted of two groups of 20 participants: Auriculotherapy group (A) and Control Group(C). The participants responded to the RDC/TMD, Fletcher & Luckett questionnaires, and the Beck Anxiety Inventory to analyze TMD, SD, and anxiety before and after the treatment. RESULTS: The participants presented scores corresponding to mild to moderateanxiety (MDN = 17; CI = [13.16;22.31]) and after treatment, normalor non-existent anxiety (MDN = 9; CI = [8.76; 17.12]) (p = 0.005). There was no significant difference (p > 0.05) between the controland 20 auriculotherapy groups for TMD and SD. DISCUSSION: The results suggest that auriculotherapy was effective in the treatment of anxiety. However, it did not prove effective with the results of the SD and symptoms of TMD.

Is there any association between sleep disorder and temporomandibular joint dysfunction in adults? - A systematic review.

OBJECTIVE: To answer the question, "Is there any association between sleep disorder and temporomandibular joint dysfunction (TMD) in adults?" METHODS: This study followed PRISMA guidelines and was registered in PROSPERO. As eligibility criteria, observational studies that evaluated the association between sleep disorder and TMD were included. Exclusion criteria included a) studies that evaluated sleep quality and not the association of sleep disorders with TMD, b) experimental studies, book chapters, conference proceedings, and systematic reviews. The Joanna Briggs Institute tool was used to assess the risk of bias. RESULTS: In the literature search, 3425 articles were found. After the exclusion of duplicates, 2752 were selected for reading the title and abstract, of which 26 were read in full, and 18 met eligibility criteria. CONCLUSION: The association of sleep bruxism with TMD is controversial. While, for obstructive sleep apnea, insomnia, snoring, and gastroesophageal reflux, the analyzed studies showed a positive association.

Efficacy of Antimicrobial Agents in Dentifrices: A Systematic Review.

The aim of this systematic review was to verify if the presence of different antimicrobial agents in dentifrices is effective in reducing the number of microorganisms for disease prevention. This review followed the Preferred Reporting Items for Systematic Review and Meta-Analysis (PRISMA) guidelines and was registered with the Open Science Framework (OSF). A search was conducted in the PubMed, Embase, Scopus, and Web of Science databases. Two independent authors reviewed the titles and abstracts according to the inclusion criteria, which comprised in vitro studies published in English that evaluated the efficacy of antimicrobial agents in dentifrices and their antimicrobial activity. A total of 527 articles were found. Of these, 334 were included for reading of the title and abstract, and 69 were selected for reading in full. In the end, 39 articles remained in this review. Triclosan, sodium fluoride, and sodium monofluorophosphate were the most commonly used chemical antimicrobial agents. Among the herbal agents, miswak extract and neem extract were the most commonly used. The presence of antimicrobial agents in dentifrice formulations can promote the reduction of the number of microorganisms involved in oral diseases, but with variations in their effectiveness, depending on the agent used and the microorganism evaluated.

Relationship between dental implant macro-design and osseointegration: a systematic review.

PURPOSE: This systematic review aimed to determine whether differences in the macro-geometry of titanium implants promote changes in osseointegration. MATERIAL AND METHOD: SCOPUS, PubMed/Medline, Web of Science, and EMBASE databases were searched in June 2021. In addition, it was performed a manual search of the reference lists of the included articles. Eligibility criteria were in vivo studies that addressed the effect of titanium implant macro-geometry on osseointegration, studies that evaluated periodontally healthy models, and papers indexed in Journal Citation Reports. RESULTS: The database search resulted in 1037 articles. Of the 19 articles selected for full reading, 16 remained in this systematic review. These had a high heterogeneity making it hard to perform statistical analysis of the data, so a descriptive analysis was performed. CONCLUSIONS: Based on the studies included in this systematic review, implant macro-geometry provides influences on osseointegration. In this sense, the various isolated characteristics (thread type, thread pitch, thread depth, face angle) should be studied so that the implant geometry can balance the compressive stress and tensile stress and produce a minimum shear force.

Clinical and In Situ Oral Biofilm Formation on Dental Implant Abutment Materials: A Systematic Review.

PURPOSE: This review aimed to summarize the current literature on the oral biofilm formation on alternative abutment materials compared with titanium (Ti) or Ti alloy in clinical and in situ conditions. MATERIALS AND METHODS: An electronic database search was conducted in PubMed, Cochrane Library, EMBASE, Scopus, Web of Science, LIVIVO, BVS, ProQuest, and OpenGrey up to November 2020. Clinical and in situ studies evaluating the biofilm formed on metallic, ceramic, or polymeric abutment materials compared with Ti or Ti alloy were included. Outcome measures were microbial counts/profile, cell viability, and biofilm coverage/thickness. Clinical parameters were deemed secondary outcomes. Risk of bias was assessed by RoB 2 and ROBINS-I tools. RESULTS: A total of 10 clinical and 9 in situ studies were included. Meta-analysis was not performed due to heterogeneity across studies. The abutment materials polytetrafluoroethylene, gold alloy, gold-platinum alloy, cobalt-chromium, alumina, and zirconia were reported. Six out of ten clinical studies (60%) and four out of nine in situ studies (44%) found no qualitative or quantitative microbiologic differences between tested materials. When significant differences were detected, conflicting results were reported. Clinical outcomes were consistent with healthy conditions for all investigated materials. CONCLUSION: There is not enough evidence to support the existence of relevant microbiologic differences in the biofilm formed on alternative abutment materials over Ti and its alloys in oral conditions. No evident relationship between microbiologic results and clinical outcomes were found. In situ studies and polymicrobial analyses showed a higher tendency to find significant differences between materials.